
Solar Inverters Brisbane - Expert Solar Inverter Installation for Homes and Businesses
Fill out your details and we'll call you back
Fill out your details and we'll call you back
* indicates required fields
"*" indicates required fields
Add Battery Storage – EOFY Offer Extended Until 31 July 2026
Solar Inverter Installation in Brisbane
Your panels get the credit. Your inverter does the work.
It runs every daylight hour, turning what the roof collects into the power your appliances actually use. Installing a solar inverter in Brisbane is a vital part of converting to solar energy. Get maximum efficiency and save the most money by adding an inverter.
Volteam Electric supplies, installs, and replaces solar inverters for Brisbane homes and businesses, out of the Northgate workshop on Crockford Street. Our licences are QLD Electrical License #72286 and ABN 44 144 945 424, and our installers hold CEC accreditation.
Book a solar inverter installation in Brisbane with a team that sizes it properly.

Our Solar
Inverter Brands and Products
We install solar inverters from Fronius, Sungrow, GoodWe, SMA, and SolarEdge.
Most Brisbane homes run a single unit matched to the array on the roof. Warehouses, workshops, office buildings, and retail sites step up into the commercial range, which we cover through our commercial solar work.
The range is below. Which one suits you comes down to your system size, where the unit can be mounted, and whether a solar battery is on the cards later.


- Capacity: 5kW, 8.2kW, 10kW
- Dimensions: 595 × 529 × 180mm
- Maximum Efficiency: 98.20%
- Warranty: 10-year Parts & Labour Warranty
- Certificates: IEC 62109, IEC 62909, AS/NZS 4777.2, CEI 0-21, ABNT BNR 16149 und 16150, IEC 62116, IEC 61727 , G98/G99, R25


- Capacity: 5kW, 8.5kW, 10kW
- Dimensions: 415 × 511 × 175 mm
- Maximum Efficiency: 97.70%
- Warranty: 10 years
- Certificates: IEC 61727:2004, IEC 62116:2014


- Capacity: 15kW
- Dimensions: 725 x 510 x 225mm
- Maximum Efficiency: 98.1%
- Warranty: 10-year Parts & Labour Warranty
- Certificates: ÖVE / ÖNORM E 8001-4-712, DIN V VDE 0126-1-1/A1, VDE AR N 4105, IEC 62109-1/-2, IEC 62116, IEC 61727, AS 3100, AS 4777-2, AS 4777-3, CER 06-190, G83/2, UNE 206007-1, SI 4777 1), CEI 0-21 1) , NRS 097


- Capacity: 27kW
- Dimensions: 512 x 751 x 227.5mm
- Maximum Efficiency: 98.3%
- Warranty: Warranty coverage of up to 10 years for registered products
- Certificates: ÖVE / ÖNORM E 8001-4-712, DIN V VDE 0126-1-1/A1, VDE AR N 4105, IEC 62109-1/-2, IEC 62116, IEC 61727, AS 3100, AS 4777-2, AS 4777-3, CER 06-190, G83/2, UNE 206007-1, SI 4777 1), CEI 0-21 1) , NRS 097


- Capacity: 30kW, 50kW, and 110kWh
- Dimensions: 1051 x 660 x 362.5mm
- Maximum Efficiency: 98.7%
- Warranty: 10-year Parts & Labour Warranty
- Certificates: IEC 62109, IEC 61727, IEC 62116, IEC 60068, IEC 61683, VDE-AR-N 4110:2018, VDE-AR-N 4120:2018, IEC 61000-6-3, EN 50549, AS/NZS 4777.2:2015, CEI 0-21, VDE 0126-1-1/A1 VFR 2014, UTE C15-712-1:2013, DEWA
Why Choose Volteam for Your Solar Inverter Installation in Brisbane?
An inverter gets sized, sited, and commissioned, and all three of those decide how well it performs and how long it lasts. Our team handles every one of them, on brand new systems and on the ones already up on Brisbane roofs.

Sized to your array, not to a price list
We match the unit to the panels you have or the panels you're about to get, so you aren't paying for capacity you'll never use or throttling a roof that could give you more.
Replacements and repairs on existing systems
We take on Brisbane solar inverter replacements on any system, diagnose faults on units still inside their warranty period, and get the claim moving where there's cover.
Battery ready when you are
If storage is anywhere in your plans, we'll fit a hybrid unit now so you aren't paying to replace a perfectly good inverter the day you decide to add one.
Licensed electricians, CEC accredited
QLD Electrical License #72286. The switchboard work, the compliance paperwork, and the network notification are all handled by the same team that fits the unit.
Mounted where the heat can't reach it
Inverters run hotter and age faster in full Brisbane sun, so we pick a shaded, ventilated position and mount it for airflow rather than for whatever wall is closest.
Our 4 Easy Steps to Secure Your Solar Inverter Installation
Getting a solar inverter fitted in Brisbane takes four steps, and we keep them short.
1
2
3
4
Provide Your Details
We need your system size, the brand of the existing unit if you’re replacing one, and whereabouts in Brisbane you are. A photo of the current setup saves everybody time.
Site Visit
We look at the mounting position, the cable route, and the meter box, then work out where the unit will run coolest and stay easiest to reach.
Get a Quote
A written quote covering the inverter, the mounting, the wiring, and the commissioning, with the warranty terms set out on the same page.
Installation
The unit goes on, gets commissioned, and gets set to the grid limits your property is approved for. Monitoring is connected to your phone before we leave.
Not Sure Which Solar Inverter You Need?
Send through your system details and you’ll get a straight recommendation: the unit that fits, what it costs, and whether paying up for a hybrid is worth it on your property.
The Benefits of a Quality Solar Inverter in Brisbane
The inverter is the part of a solar system you deal with every day, and a good one earns its place:
- More of what your roof makes reaches your power points. Some energy is always lost in the conversion, and a quality unit keeps that loss small. Over a 20 year system life, a couple of percent adds up to a lot of electricity.
- A hybrid unit keeps the battery option open. Fit one now and storage becomes an add-on later instead of a rebuild. Worth knowing before you buy, because the federal Cheaper Home Batteries Program has made batteries a much closer decision.
- You can finally see what your system is doing. Monitoring lives in the inverter, so this is the component that tells you what you generated, what you used, and what went back to the grid.
- It keeps you inside the grid’s limits automatically. Every Brisbane property has a cap on how much power it can push back to the grid at once, and the inverter is the piece that gets set to respect it. That’s why the commissioning matters as much as the hardware.
- The right mounting position adds years to it. Heat is what wears an inverter out, and Brisbane supplies plenty of it. A shaded, well ventilated spot is the cheapest reliability upgrade available.
- Warranty cover you can actually claim. Quality units carry 10 year cover as standard, and having a local installer who’ll handle the claim is the difference between cover on paper and cover in practice.
Planning the whole system? See our solar panel installation and solar batteries pages.


Solar Brands We Trust and Install
Our Trusted Partners in Solar Excellence: Collaborating with Voltteam, Brisbane’s Leading Solar Experts

Origin

AGL

ServiceStream

Tesla Energy

Our Panel Brands






Our Inverter Brands






Our Solar Battery Brands







Frequently Asked Questions
How much does a solar inverter cost in Brisbane? + -
Prices move with capacity and features. A quality 5kW inverter commonly sits somewhere between $1,200 and $2,500 supplied, with hybrid and battery-ready units above that and commercial capacity higher again. A straight swap on an existing system adds the electrical work on top. Those are market estimates, so get the real number priced against your own system.
How long does a solar inverter last? + -
Ten to fifteen years is the usual working life, which is roughly half what the panels above it will do. That gap catches people out, because it means most Brisbane solar owners replace an inverter at least once while the original panels are still generating perfectly well.
What size solar inverter do I need? + -
It's set by the size of your array rather than by your power bill. Australian systems are commonly built with a panel array somewhat larger than the inverter, which is why a 6.6kW roof is so often paired with a 5kW unit. If you're planning to add panels later, tell us now, because that changes the sizing.
Will my current inverter take a battery? + -
Sometimes. Hybrid units accept a battery directly. A standard inverter doesn't, so you either swap it for a hybrid or run a second battery inverter beside it. We check which one you've got before you commit to anything.
Where should a solar inverter be installed? + -
Out of direct sun, with air around it, and within reasonable reach of the meter box. Garage walls and shaded side walls are the usual picks across Brisbane. A west-facing wall in full afternoon sun is the position that shortens a unit's life fastest.
String inverter or hybrid inverter, which one do I need? + -
A string inverter turns your roof's output into household power and stops there. A hybrid does that and manages a battery as well, charging it and drawing it back down. Hybrids cost more upfront, so it comes down to whether storage is in your plans within the next few years.
What are the signs of a failing solar inverter? + -
Look for an error code or a red light on the unit, a generation figure that has dropped without any change in the weather, or monitoring that has simply gone quiet. Inverters tend to degrade in stages rather than stop dead, so a system that's quietly underperforming is worth investigating rather than living with.
Which solar inverter brand is best? + -
There isn't one answer. Fronius, Sungrow, GoodWe, SMA, and SolarEdge all make units we'd happily put on a Brisbane home, and the right pick turns on your array, your budget, and your battery plans. We've weighed them up in best solar inverters in Australia.
Do I need a new inverter if I add more panels? + -
Often yes. An existing unit is sized to the array it was installed with, so a meaningful expansion usually needs more inverter capacity. It's worth checking before you order panels, because the sequencing changes what the upgrade costs.
Does a new solar inverter need approval in Brisbane? + -
Yes. A replacement or a new install has to be notified to your electricity network and meet the current standards, and how much it's allowed to send back to the grid has to match what your property is approved for. We handle that paperwork as part of the job. Our solar inverter installation guide walks through what to expect.
Where You'll Find Us in Brisbane
Our inverters go up in garages out through Carindale and The Gap, on the shaded side walls of the character homes in Bulimba and Hawthorne, and in the plant rooms of workshops and warehouses around Eagle Farm and Rocklea.
From the Northgate workshop we look after solar panel installation, solar batteries, EV charging, and general electrical work for Brisbane homes and businesses.
Ready to book Brisbane solar inverter installers?






